Product ID:THERMOFIT HEAT-SHRINKABLE POLYMERIC PRODUCT
MSDS Date:04/01/1991
FSC:5975
NIIN:01-078-1231
MSDS Number: BRNRR

RAYCHEM CORPORATION

300 CONSTITUTION DRIVE
MENLO PARK, CA 94025
US

Emergency Phone: 415-361-4907

Info Phone: 415-361-4907

Preparer: DONNA SEID

Cage: 06099

RAYCHEM CORPORATION

MENLO PARK, CA 94025 US

Telephone: (415)361-3333

Cage: 06099

BASE POLYMER MATERIAL INCLUDING INGREDIENTS # 2 TO 8.

RTECS: 9999999ZZ

POLYETHYLENE COPOLYMER

CAS: 9010-77-9

OLEFIN COPOLYMERS

FLUOROPOLYMER SOLIDS;(FLUOROPOLYMERS)

CHLOROPOLYMER

POLYAMIDE

POLYESTER

SILICONE

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PRODUCTS ARE NONHAZADOUS UNLESS
OVERHEATED, DEGRADATION & COMBUSTION BY PRODUCTS MAY BE TOXIC &
SHOULD NOT BE INHALED. OVERHEATING OF THE PRODUCT TO CHARRING OR
BURNING WILL PRODUCE FUMES THAT MAY CAU SE EYE, SKIN, NOSE AND
THROAT IRRITATION, HEADACHE, DIZZINESS, NAUSEA, IN ABSENCE OF
VENTILATION, POSSIBLE ASPHYXIATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:IRRITATION OF EYES, NOSE AND THROAT, HEADACHE,
DIZZINESS, NAUSEA, ASPHYXIATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE:FLUSH WITH WATER FOR AT LEAST 15 MINS. SKIN:IF MOLTEN
ADHESIVE/MASTIC CONTACTS SKIN, COOL IMMEDIATELY WITH WATER. DO NOT
ATTEMPT TO REMOVE MATERIAL FROM THE SKIN, TREAT AS BURN AND SEEK
MEDICAL AT TENTION. INHALATION:REMOVE TO FRESH AIR. GET MEDICAL
HELP IF ANY BREATHING PROBLEMS DEVELOP. INGESTION:NOT A NORMAL
ROUTE OF EXPOSURE. IF SWALLOWED, SEEK MEDICAL HELP.

Extinguishing Media:CARBON DIOXIDE, WATER, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR PROTECTIVE CLOTHING
AND SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:FIRE OR EXCESSIVE HEAT MAY CAUSE
PRODUCTION OF HAZARDOUS DECOMPOSITION PRODUCTS.

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID HEATING PRODUCTS BEYOND
TEMPERATURES REQUIRED FOR NORMAL INSTALLATION.
Other Precautions:IF PRODUCTS CHAR OR BURN, IMMEDIATELY STOP HEATING.
AVOID INHALING ANY FUMES WHICH MAY EVOLVE UNDER SUCH CIRCUMSTANCES.
ALLOW ANY FUMES TO DISPERSE AND VENTILATE BEFORE CONTINUING WORK IN
THE AREA.

Respiratory Protection:IF INSTALLATION OCCURS IN A CONFINED,
UNVENTILATED AREA, NIOSH/MSHA APPROVED RESPIRATORS ARE RECOMMENDED.
Ventilation:GENERAL OR MECHANICAL TO KEEP EXPOSURE BELOW TLV.
Protective Gloves:HEAT RESISTANT
Eye Protection:GOGGLES
Other Protective Equipment:TO BE BASED ON OPERATION PERFORMED, FOLLOW
OSHA, ANSI, OR NIOSH GUIDELINES.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PRODS: ALSO INCLUDES LOW MOLECULAR WEIGHT HYDROCARBONS, AND
FLOURO-OLEFINS.

HCC:N1
Appearance and Odor:PLASTIC TUBING AND MOLDED PARTS IN A VARIETY OF
SHAPES AND COLORS.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:AVOID OVERHEATING OF PRODUCT.
Hazardous Decomposition Products:OXIDES OF CARBON, NITROGEN, SULFUR AND
PHOSPHORUS; ALDEHYDES, ACETIC ACID, SIO2, HCL, HF, HBR,.. SEE
SUPPLEMENTARY DATA

Waste Disposal Methods:ALL PRODUCTS ARE CLASSIFIED AS NON-HAZ WASTE &
SHOULD BE BURIED/INCINERATED AT APPROVED SITES IN ACCORDANCE WITH
LOCAL, STATE AND FEDERAL REGULATION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.